|
Post by deeno on Oct 26, 2006 18:11:14 GMT -8
There are some reports of 12grams sticking inside of Overlords. I haven't had that problem, but I ran out of the nice 12grams from RAP4 and can only get Crossmans around here. I read on the Ariakon forums that some guy put a spring inside to help eject the cartridge. Brilliant! To add to this, I used a progressive rate spring so that most of the force would be when the spring is fully compressed (cartridge fully inserted) and less force when you're screwing in the plug. The original measurements given for the spring were 3.05cm length when extended, .86cm when compressed, and 1.78cm diameter. ~25-30lb of pressure. I just used that as a ball park and went to the hardware to find one that fit. This mod works like a charm and cost me $2.32
|
|