Voodoo
Thong
FORMERLY KNOWN AS GHOST(not really, just call me Will if you want)
Posts: 131
|
Post by Voodoo on Nov 4, 2007 17:14:21 GMT -8
Ok crap-tastic pictures are here. A 98C with Cyclone Feed and RT JT-USA Tac-5 Game Face E-Rex Pro Tippmann Pro Carbine, permanently nerfed. its missing a connector rod and the front piece of the firing mech.
|
|
|
Post by Shrek on Nov 4, 2007 19:31:09 GMT -8
Locks good Will. I will going to call Tippman tomorrow and see if that is the right bolt. I totally spaced you have a ACT 98
|
|
Voodoo
Thong
FORMERLY KNOWN AS GHOST(not really, just call me Will if you want)
Posts: 131
|
Post by Voodoo on Nov 13, 2007 19:23:46 GMT -8
Um yah my camera is being mental so i'm not able to get a picture of my new Mask, but its a Proto Switch, my only issue with it is 1. its not a v-force grill 2. its not a v-force profiler 3. i can see myself in the lens... t'sall good thou only 30$
|
|
|
Post by deeno on Nov 14, 2007 12:51:43 GMT -8
Looking good Will. Don't sweat the mask too much unless it's uncomfortable while worn! All of the nice ones work about the same anyways and as backwards as it sounds, the glassy/reflective lenses actually work great in the brush. What somebody looking at you sees is a reflection of all that is around you, ie tress and bushes . Call it adaptive camo if you like ;D
|
|
Voodoo
Thong
FORMERLY KNOWN AS GHOST(not really, just call me Will if you want)
Posts: 131
|
Post by Voodoo on Jan 16, 2008 18:24:35 GMT -8
forgotten
|
|
|
Post by orpackrat on Jan 16, 2008 19:31:37 GMT -8
With the range of a paintball gun, there is really no such thing as a "sniper". A few suggestions: Get a straight barrel Add a riser for the scope (scopes are more for decoration) A red dot sight would probably be better than a scope Air through stock would be nice
|
|
Voodoo
Thong
FORMERLY KNOWN AS GHOST(not really, just call me Will if you want)
Posts: 131
|
Post by Voodoo on Jan 16, 2008 19:56:56 GMT -8
yeah I've though about those things, and of course get a straight barrel lol that one from that picture is actually a stretched out image of a 14" 98c barrel, and as for the riser thats a nu duh, looking through it you'd see the spring feed, the riser i wanted to get was it had the rise plus an offset rail that i would use for oh say a dot sight. and i haven't been able to find an air threw stock fixed or collapsing stock for it. so i was thinking maybe just go remote line like i will be with my tippmann. but overall i think that this is a faily realistic looking rifle. its all in the state of mind i guess. i was also thinking of getting a noise amplifier for my tippmann, that would be able to double on my tac-5 do u know anything can do that?
|
|
|
Post by orpackrat on Jan 16, 2008 23:07:43 GMT -8
yeah I've though about those things, and of course get a straight barrel lol that one from that picture is actually a stretched out image of a 14" 98c barrel, and as for the riser thats a nu duh, looking through it you'd see the spring feed, the riser i wanted to get was it had the rise plus an offset rail that i would use for oh say a dot sight. and i haven't been able to find an air threw stock fixed or collapsing stock for it. so i was thinking maybe just go remote line like i will be with my tippmann. but overall i think that this is a faily realistic looking rifle. its all in the state of mind i guess. i was also thinking of getting a noise amplifier for my tippmann, that would be able to double on my tac-5 do u know anything can do that?You could easily make one. Run some macro line down the back side of the marker and stock and install a QD nipple in the stock. Dishka, it mounts on the end of your barrel with a hex screw. Easy on and off (you might want to stick a small strip of rubber between the hex screw and barrel to avoid marking you barrel). www.opsgear.com/Dishka-Flash-Suppressor-p/tts-diska.htmI think BlackBird has them.
|
|
|
Post by scphantom on Jan 17, 2008 12:24:14 GMT -8
Those stocks are on clearance at Joe's for $16.78 or so.
|
|
Voodoo
Thong
FORMERLY KNOWN AS GHOST(not really, just call me Will if you want)
Posts: 131
|
Post by Voodoo on Jan 17, 2008 17:34:56 GMT -8
wow, the funny part about that is i just now get back from joes where i see them for sale at $14.87, and i only have 10bucks which i needed for gas. grr they have like 2 left hopefully they'll still be some there sunday.
|
|
|
Post by shifty on Jan 21, 2008 16:31:10 GMT -8
orpackrat, I disagree with there not being any snipers in paintball but the role is definitely played way different. I agree that long range shots are never going to be accurate enough or travel far enough but I love crawling around and making one-shot kills with my Q-bow. Red dot sights are definitely better then scopes in paintball though.
|
|
Voodoo
Thong
FORMERLY KNOWN AS GHOST(not really, just call me Will if you want)
Posts: 131
|
Post by Voodoo on Aug 16, 2008 19:09:56 GMT -8
so i was over at shreks today testing out a silencer i made for my E-rex pro, along with testing its 20bps capability my results
1. The gun de-cocks if shot at 11bps and higher for more then a second.
2. 48cu in 3000PSI tank get eaten alive by my marker
3. the marker is loud. really loud. ask shrek and fiona.
in other words. i bought another e-rex off of ebay for 15$ and am thinking of a DT.... and yes. that is a lot of pain.
|
|
Voodoo
Thong
FORMERLY KNOWN AS GHOST(not really, just call me Will if you want)
Posts: 131
|
Post by Voodoo on Aug 21, 2008 17:28:26 GMT -8
ok i just uploaded new pictures of my guns. i might have another e-rex by the end of the week to fiddle around with. 40bps DT?
|
|