|
Post by matteo on Nov 7, 2012 16:57:13 GMT -8
Hey guys, I've been searching the net for a few days now and I cant figure out how the hell they mounted the stock on there like this. Figured you kids and your wonderful brains might be able to wrap around it. Any thoughts? And if any one you have set up an air tank like this I would love to know how you did it. Ive found a few kits and I think I could cobble it together but having never done it I would love outside input. Other than the forward weight that it will incur, I know that already ^_^
|
|
|
Post by matteo on Nov 7, 2012 16:59:54 GMT -8
|
|
|
Post by LT. on Nov 8, 2012 11:27:40 GMT -8
Bottom line adapter..
|
|
|
Post by scphantom on Nov 8, 2012 17:21:52 GMT -8
Looks like a bottom line adapter like LT said, but I can't see how the stock is mounted to the bottomline adapter very well.
|
|
|
Post by matteo on Nov 8, 2012 17:27:03 GMT -8
I've been looking at the bottomline adapters as well... Just not sure how they mounted the stock to it like that... Ah well, nothing that a drill and some screws wont fix :-D Thanks for the reply!!
|
|
|
Post by Shrek on Nov 11, 2012 19:29:34 GMT -8
I HAVE NEVER SEEN THAT MOD BEFORE EVER HAVE YOU LOOKED ON THE A5 OG FORUM
|
|
Outcast
Administrator
Unit: Team Walkons
Posts: 1,004
|
Post by Outcast on Nov 12, 2012 7:04:41 GMT -8
My jcs voodoo folding stock came with that adapter. They don't make them anymore, but the website shows what they look like. www.jetcityspecialties.com/parts.htmBasically the same as a drop forward. I will look in my box and see if I still have the adapter
|
|
Outcast
Administrator
Unit: Team Walkons
Posts: 1,004
|
Post by Outcast on Nov 12, 2012 8:29:11 GMT -8
|
|
Outcast
Administrator
Unit: Team Walkons
Posts: 1,004
|
Post by Outcast on Nov 12, 2012 8:41:28 GMT -8
|
|
|
Post by orpackrat on Nov 13, 2012 2:07:43 GMT -8
I've done both the foward tank and can do the stock like that with ease using my RAP4 remote line CAR Stock on the ASA.
For the forward mounted tank, just grab a BT-16 forward mounting tank adapter, 1/8" tap, 1/8" hex plug, 90* fitting short braided steel hose, and lower Rail mount for the A5. Basically your going to thread the top hole on the forward tank asa and plug it with the hex plug, then from the side port, run the 90* fitting and the short braided steel hose into the tombstone. The forward tank mount ASA mounts via the lower A5 rail. Depending on the clearance, you may need to shave down the forward nub.
|
|
|
Post by matteo on Nov 13, 2012 11:52:45 GMT -8
SWEEET!!! You guys are the best! That you for the awesome info!!!
|
|