|
Post by LT. on Jul 22, 2011 18:34:19 GMT -8
super_stanchy;1929461]so i got my t8 today
staring at the barrel/detents/length
i think the best way to do this would be to cut somewhere around .750 from the tip (now its 2 pieces)
bore the barrel from the cut end, towards the breech end
then
thread the cut ends to screw back together
problem its gonna lose some length
if that happens might now be able to push the barrel in easily for removal
fix make a new, longer tip that screws onto the new "back"
problem its gonna be raw unless i anno em, only way to anno em is if i make more than 1 at a time
thoughts?
|
|
|
Post by LT. on Jul 22, 2011 18:40:25 GMT -8
|
|
|
Post by LT. on Jul 22, 2011 21:01:44 GMT -8
T8 boring update. The barrel will be about .300-.500 shorter .
We should give stanchy place on here of his own.
|
|
|
Post by LT. on Jul 28, 2011 15:36:53 GMT -8
Ok guys and gals. Freak bores now for T8/9 T8.1/9.1
|
|
|
Post by LT. on Jul 28, 2011 15:49:37 GMT -8
Here's a pic guys.
|
|
tick
Bare Foot
Posts: 16
|
Post by tick on Jul 28, 2011 19:36:52 GMT -8
gonna be sick!!
|
|
|
Post by LT. on Jul 28, 2011 22:10:19 GMT -8
Yep it is gonna rock.
|
|
|
Post by LT. on Aug 1, 2011 8:37:41 GMT -8
Ok price is 65.00 plus shipping.
First Strike barrels in the works still.
|
|