|
Post by orpackrat on Jan 12, 2018 22:01:55 GMT -8
Been a long time since I was on here
|
|
|
Post by orpackrat on Dec 9, 2012 0:20:59 GMT -8
I can supply you with a set of equipment cousin.
|
|
|
Post by orpackrat on Nov 25, 2012 0:14:22 GMT -8
Hope the shotguns arrive in time.
|
|
|
Post by orpackrat on Nov 13, 2012 2:07:43 GMT -8
I've done both the foward tank and can do the stock like that with ease using my RAP4 remote line CAR Stock on the ASA.
For the forward mounted tank, just grab a BT-16 forward mounting tank adapter, 1/8" tap, 1/8" hex plug, 90* fitting short braided steel hose, and lower Rail mount for the A5. Basically your going to thread the top hole on the forward tank asa and plug it with the hex plug, then from the side port, run the 90* fitting and the short braided steel hose into the tombstone. The forward tank mount ASA mounts via the lower A5 rail. Depending on the clearance, you may need to shave down the forward nub.
|
|
|
Yo!
Jun 3, 2012 12:25:01 GMT -8
Post by orpackrat on Jun 3, 2012 12:25:01 GMT -8
I like the Rip Clip on the TM7, that way you can run A5 hoppers from Tac Caps to 450 hoppers to 1100 round pod reloaders lol.
|
|
|
Yo!
May 22, 2012 3:48:22 GMT -8
Post by orpackrat on May 22, 2012 3:48:22 GMT -8
If possible, its best to try out the gear that interests you the most. I have a lot of gear that can be tried out that range from pump markers to MilSim to Magfed to electronic. If you happen to be at a game I am attending, I can set you up with a variety of styles for you to try out and see what you like best.
|
|
|
Post by orpackrat on May 13, 2012 19:48:01 GMT -8
Won this from SSC at SG43, don't have a phantom any more and don't really have a use for it: You get what looks to be a full rebuild kit including a hammer spring kit, Ring Sizers, new thumb screws, Tri-Fluted Hammer, latest generation of polished bolt (has an O-ring in the velocity adjuster to prevent it from unscrewing and losing velocity). Was told by SSC, this kit is worth over $100. My Asking price, $85 OBO, or trade for a basic A5
|
|
|
barels
Apr 25, 2012 18:37:47 GMT -8
Post by orpackrat on Apr 25, 2012 18:37:47 GMT -8
Do you mean Ion Threads? Smart parts was a company, they produced many different barrels and threads.
|
|
|
Post by orpackrat on Apr 16, 2012 3:09:47 GMT -8
I'll trade you a jersey + the difference for the Eraser + 2 mags I'll do that, $93 - the Jersey I owe you for.
|
|
|
Post by orpackrat on Apr 14, 2012 9:11:59 GMT -8
These have been around awhile, they are nice but are a little hard to clean. I like my $100 filler better and it has a much higher paint capacity, easier to fill, far easier to clean, etc, etc.
This probably won't sell on here, most of of have our own fill stations that work just fine and our grenades that we make are personal use rather than for sale. To sell them you need a good way to ship them, and the best way to ship them is heat shrink packaging.
|
|
|
Post by orpackrat on Apr 14, 2012 9:05:35 GMT -8
Reserved for more.
|
|
|
Post by orpackrat on Apr 14, 2012 9:05:01 GMT -8
Well, need to sell a bunch of gear to help pay for my Girl Friend and I to go to Super Game, it will be my 5th time and her First Time, hoping to sell enough gear to get make it the best game she has been too yet: So, rules are simple, use common sense, I prefer Paypal, shipping not included unless stated, I prefer to ship within the US, I use flat rate boxes as much as possible. Prices are OBO. I will be going to Outlaw and Lawdogs so gear can be picked up there to avoid shipping, I will also be able to accept VISA, MasterCard, Discover, and American Express CC's at the game. I will be adding more as I dig though gear, how about some pistols for Starters: Kingmann Chaser and Eraser, magazines, and Nelson .43 paintballs (the good stuff): Chaser with single mag, good working condition, comes with a 50rd pod of nelson .43 paintballs: $55
Eraser with single mag, good working condition, comes with a 50rd pod of nelson .43 paintballs: (Sold)
Extra Magazines: $10 each or 2 for $18 (2 Sold) (2 Pending)
Next is an Empire Trracer, LNIB (only took out to disassemble and see what parts would cross over to the older trracers and dry fire a couple times), comes with Ronin Stock class Harness and 9oz Co2: $115Up next is a project MR3, no barrel, have the front shroud but it has a crack (not pictured), has just a standard 9V in it, board works just fine, but does not have the voltage to release the sear, needs a 9.6V and a charger: $25Here is an oldie, an A.T.C.I. TM11-A pump, tested and works just fine with HPA: $3513/3000 HPA Tank Covers, I knit these by hand which takes around 100' of continuous 550 cord. All will have OD 3/16" 330lb test Shock Cord, Blue camo cover has black lesser shock cord that I used to use and will be replaced with the new cord, Red/White/Blue and Yellow do not currently have the shock cord but it will be added and test fit before shipping: $30More will be added.
|
|
|
Post by orpackrat on Apr 4, 2012 19:09:28 GMT -8
How early in the morning is the planned start time, I'd like to help out for a couple hours before going down to Eugene.
|
|
|
Post by orpackrat on Apr 2, 2012 17:21:08 GMT -8
Lol, I got my Empire Trracer up for sale now.
|
|
|
Post by orpackrat on Apr 2, 2012 2:13:36 GMT -8
I may.
|
|